Sometimes you may need to install electric outlets and light fixtures outdoors. The normal electrical tools will not help you under such cases. The outdoor electrical boxes are designed especially for such purposes for ease of installation. They usually come with a fixture or an outdoor cover that is rated for wet locations. Several of these electric boxes come with a waterproof structure to make sure they can resist the dampness of the environment.
They are designed in form of outdoor outlet covers to also improve the decor. Various shapes and designs beautifully complement the surrounding space. When you desire to make lighting connections in the open-air garden, you can use a decent quality outdoor electric box. But, the availability of connectors and screws facilitate ease of setup. Most of them present an easy and safe approach for installing light fixtures outdoors. They work perfectly to join wires inside since they are protected against water and rain. So, to stay away from confusion, go through the info on the best outdoor electrical boxes:
Bestseller Outdoor Electrical Boxes On Amazon:
List of 10 Best Outdoor Electrical Boxes Review in 2020:
10. Outdoor Electrical Box – TayMac MM7440C Two-Gang In-Use Cover:
Being weatherproof, this TayMac electric box is suitable for all environments. The pack contains this electric box, accessories, and covers. Presented in a vertical or horizontal configuration, this cover properly encompasses any electrical outlet within seconds. Due to the universal fit, you can use this cover for all kinds of receptacles. Glancing at the construction, there is the use of polycarbonate to resist impacts. Also, it resists break and rust.
For ease of installation, the keyhole mount is available. The patented knock-out technique provides a custom fit. You just need to snap out the knock-outs to perfectly fitting your electrical outlet. Included with this cover are an attached gasket and mounting hardware. But, the controller is very huge ad the sump should be plugged inside the controller that plugs into the outlet. Furthermore, the cable inlets are aligned opposite the hinges.
Pros:
- Resistant to corrosion and break
- Easy to mount with included hardware
- Waterproof construction
Why We Liked Outdoor Electrical Boxes?
It presents lots of configurations horizontally and vertically. In any weather, it can work flawlessly.
9. GPD19B-1 Gard-N-Post Low-Profile Lighting Post Enclosure:
When you wish to install an outdoor lighting post, this enclosure is very much useful. It is extremely lightweight and found it easy to install. You can use it to install light switches, a light fixture, or outlets within your garden. Moreover, the included stabilizers do not need assembly. These stabilizers also provide firm support.
The installation of devices and light fixtures becomes very easy. But, there is the use of durable plastic that does not break easily. It stays unaffected due to wear & tear from the environment. One unique feature is this post enclosure is available from 9-73 inches height. A separator is available to install power outlets in the same post. At the bottom, the design shows an inclined cut for access to the underground wires.
Pros:
- Heavy-duty plastic offers durability
- No assembly required
- Offers firm support
Why We Liked It?
We admire the firm support it provides. Using this enclosure, you will gain easy access to the wiring underground.
8. LeMotech ABS Plastic Junction Outdoor Electrical Boxes:
Capable to resist damage due to dust and water, this junction box can work well in most weather conditions. It comes with a universal fit. The surface mount mechanism facilitates ease of installation. There is the use of rubber and plastic to make this box durable. The white color complements well with outdoor decor. With the assistance of 4 included metal screws, you can accomplish the installation easily.
There will be no damage due to rain and water. But, this aspect makes it perfect to join wires inside. The box’s thickness is perfect to add a 1-inch square opening in the rear. Therefore, it becomes easy to access power wires. Furthermore, the interior is sufficiently large to accommodate a power plug and misc wires of the camera.
Pros:
- Easy to install and use
- Comes in the perfect thickness
- Dustproof and waterproof
Why We Liked It?
No need to use extra tools for installation. Being weatherproof, it is perfect for outdoor uses.
7. Sealproof 1-Gang Rectangular Exterior Electrical Outlet Box:
The materials used imply how reliably an outdoor electrical box can perform. This one in rectangular shape is built from heavy-duty iron for durability. Along with iron, there is the use of die-cast aluminum. The powder finish makes sure this outlet box can work well in all weather conditions. No dirt or rain droplets will enter inside. The flexible design enables you to effortlessly configure it according to your needs. The design shows 3 outlet holes.
To benefit you with ease of assembly, the manufacturer includes closure plugs, mounting plugs, and ground screws. Using this box, you can remove an end plate and install new fixture mounting threads. No need to change the entire box.
Pros:
- Powder coating resists external damage
- Flexible and easy to install
- Comes in heavy-duty iron construction
Why We Liked Outdoor Electrical Boxes?
The cover, box, and outlet work flawlessly in all environments. Due to the rectangular shape, installation is easy.
6. 9X6X3 Extreme Broadband Heavy Duty Enclosure IPE963-LTC:
Recognized as a multipurpose electrical box, you can find its use in different applications. The design shows the cable retention slots allowing the technicians to work outside the box. Moreover, the quick mount rail enables any flex component to be removed without screws. Due to vertical and horizontal configurations, it is quite flexible to mount at the desired place.
The manufacturer equipped this enclosure with heavy-duty construction to resist external elements. External elements like rain, snow, wind, or sleet will not damage inside. Looking at the dimensions, it measures 9 inches width, 6 inches height, and 3 inches depth. Furthermore, the presence of thermoplastic alloy resists the external elements during day and night. At the bottom, 5 cable ports are available.
Pros:
- Resists all weather elements
- Mounting screws for easy installation
- Can resist harmful UV rays
Why We Liked It?
We are pleased with the ease of mounting. The instruction sheet is easy to follow.
5. Greenfield RB25WS Series Weatherproof Electrical Outlet Box:
The specialty of this Greenfield electrical outlet box is it can work flawlessly in all weather conditions. Being rust-proof, it stays unaffected by damage due to rain, water, wind, etc. Presence of die-cast aluminum in form of an alloy makes it durable. But, the pack contains 4 closure plugs, an instruction card, and a ground screw. They simplify the installation process. The included plugs help seal the open ends that you would not use.
You can use it to install a ring spotlight on an outlet. So, the well-made construction and beautiful finish justify your investment.
Pros:
- All accessories included for mounting
- Weatherproof and corrosion-resistant
- Aluminum alloy makes it durable
Why We Liked Outdoor Electrical Box?
Within a few minutes, you can complete the mounting process. It is easy to make wire connections.
4. Hubbell-Bell PSB37550GY Single-Gang Outdoor Electrical Boxes:
Equipped in durable PVC assembly, this Hubbell-Bell electrical box can last for years. It can resist impacts and damage due to external elements. The pack contains installation instructions and mounting hardware. Moreover, there is the presence of two 0.75-inch closure plugs and 3 reducer bushings.
Designed in a rectangular shape, this outlet box contains switches, GFCIs, and receptacles. It is found that this box is compatible with the 0.5 and 0.75 conduits. Generally, you will find this box us1ed in circuit wiring in dry or wet places. So, the detachable caps help you to add an extra outlet.
Pros:
- Resists most outdoor elements
- Can hold a GFCI outlet
- Versatile and durable
Why We Liked Outdoor Electrical Boxes?
Irrespective of the weather, it can protect the wirings. All the instructions are easy to follow.
3. TayMac MKG420CS Single Gang Complete Outdoor Electrical Boxes:
This TayMac kit is capable to sustain damage due to weather elements, scratches, and wear & tear. It comes in a powder-coated finish for extra protection. But, the die-cast metal makes this box durable. For easy connection, there are three 0.5-inch outlets. With the help of a keyhole mounting mechanism, the installation is straightforward.
In the kit, you will find a gasket, in-use cover, and mounting hardware. So, they facilitate a smooth and quick installation.
Pros:
- Offers weatherproof protection to receptacles
- Enough space for tight closure
- Quick and easy to install
Why We Liked It?
We like that it comes with various mounting accessories for easy installation.
2. Greenfield B23BRS Series Weatherproof Electrical Outlet Box:
Various fixtures have various screw distances. This Greenfield electrical outlet box supports the two highly famous distances. It is constructed in die-cast aluminum with powder coating. This coating resists corrosion. But, the outlet socket fits perfectly and the screws stay securely. Once installed properly, it continues to work well for years. So, the kit contains a ground screw, mounting screw, and 2 closure plugs.
Pros:
- Powder coating presents a beautiful look
- Lasts more in outdoor environments
- Decent quality for the price
Why We Liked It?
In most outdoor environments, it works reliably.
1. SOCKiTBOX – The Original Weatherproof Outdoor Electrical Box:
For indoors and outdoors, this electrical enclosure works flawlessly. Many people use it for applications like installing light fixtures in gardens, on fountains, etc. But, the heavy-duty construction showcases a durable plastic body and a silicone seal. Moreover, molding blocks and gasket are available for perpetual protection. With the help of this connection box, you can keep all your electrical equipment safe. No worries about the wiring when coming into contact with water.
Pros:
- IP55 rated waterproof construction
- Suitable for a wide range of garden applications
- No extra tools needed
Why We Liked Outdoor Electrical Boxes?
It is uniquely designed to shield different plug-ins, sockets, power cords, and a few other equipments.
Key Feature To Consider for outdoor electrical boxes:
Important features to choose the outdoor electrical boxes are as below:
Materials used:
To work well in outdoor conditions, it is vital to choose the one equipped with durable construction. The metal outdoor electrical boxes are typically made up of steel or aluminum or cast iron. Such boxes are devoid of plastic or PVC. You can sue the metal boxes in several local building codes. This is because they are durable and guarantee lasting performance. The next widely used material in outdoor electric boxes is plastic or PVC. Such boxes are affordably priced and they are easy to install. Moreover, they can be installed behind drywall.
Shape:
Firstly, identify the purpose and accordingly choose the one in a suitable shape. Various outdoor electrical boxes shapes fit different installation needs. The standard rectangular shape is commonly found. It contains a single electrical switch or an outlet. Moreover, they are equipped in either metal or nonmetallic units. It is found that such boxes defend wiring against the elements with the help of gaskets or watertight covers or sealed closures.
The square-shaped electrical boxes contain two devices. They contain a combination outlet or a pair of switches inside. One more prevalent shape is octagonal or circular. They contain safety devices or lightweight fixtures in the ceiling. Generally, they are useful for lights or smoke based alarms.
Types of outdoor electrical boxes:
There are 4 common types of these boxes like junction boxes, handy boxes, old work boxes, and new work boxes. The handy boxes can be mounted on a surface of a wall. In the junction boxes, the wires connect but do not connect to fixture or switch, or receptacle.
The new work box directly mounts to joists or studs or is positioned between the two studs. Fourth type i.e. old work boxes are installed on the drywall after they are hanged. So, these boxes are perfect for adding new outlets to walls.
Concluding Note:
All these outdoor electrical boxes can stay protected in any outdoor weather conditions. They facilitate ease of installation for light fixtures or outlets. No worries about damage due to rain, wind, UV rays, impact, etc.
